I am currently a foundation student at UCA Epsom, studying furniture, product design and architecture for my pathway. This page shows the development of my work through photographs of designs, maquettes and final pieces.

Thursday 29 December 2011

Handmade sketchbooks for third project

For the second SDL project I needed a small A5ish sketchbook to contain research on 2 specific words as well as a new learning journal to record any extra notes. I created both of these using waste packaging and extra paper from old sketchbooks.

The front of the learning journal
The learning journal was created using waste
cardboard covered in an old H&M bag, with
empty cut-up cans on top of this for the outside.

Cello tape was added on all sharp edges to make
 them safe, and opening rings hold together the
covers and pages by holes. Pages can be
added when necessary to avoid wastage. 
The back, once again created using 3 cut-up cans



The second book, to be used as the main research book, was created from 
an old cake-mix box with 6 separate sets of paper (once again 
unused paper from old sketchbooks) sewn into the spine. 
The idea for this book was taken from the book "How to 
Make Books", by Esther K. Smith.




Handmade sketchbook for second project

For the second project I created a sketchbook using waste materials, which would allow me to add and remove pages, print titles and research photos directly onto the pages. I reused old cardboard and covered it in scrap fabric (attached using PVA glue). The thread which binds the neck of the sketchbook can be removed and retied so that more pages can be added in. I also used scrap paper as well as normal paper for the pages, to give suitable qualities to certain pages, e.g. squared and tracing paper for research pages.



Sunday 18 December 2011

Sustainable Living

Sustainable living involves a balance between ecology, equity and economy. Brud explained it should, "Meet the needs for present without compromising the ability of future generations to meet their need", and this can be done by designing with consideration for the future by using materials and processes which will cause the least damage to the planet. For example, collaborating with interdisciplinary fields when designing to make the most effective product. Things like material origin must also be taken into consideration, with more local materials boosting economies as well as saving on delivery emissions. Below are examples of products and positive/ negative aspects of these from a sustainable outlook.

This rechargeable torch may create renewable power, 
however the sourcing of the plastic must be taken into
account. Although it could be recycled, it is probably not
 actually made from recycled materials. The LED's inside 
are more efficient than bulbs which also makes
 it a more sustainable product.

The metal used to create this ring could be
melted down to make something else, however
the energy needed to do this would not be worth
the small amount of metal created. This is
therefore not a sustainable object as a lot
of energy must have been used
to create it alone.

Batteries are a non-renewable form of energy and are
extremely hazardous to the earth if not disposed of
properly. Although a small amount of energy can be
practically created quickly, batteries are not a
sustainable form of energy to continue using
 for future generations.

This jumper was handmade using recycled wool. The
wool was already existing and will bio-degrade in the
future, which makes it a good material. Hopefully the
 jumper will last a long time, making it more
sustainable, however if fashions have changed
and future generations would not want to wear it
the materials are perfect. It also saves on delivery
and factory emissions as it is handmade.

This t-shirt was made from bamboo, which is
a fast growing and renewable material. Although
it is made from natural materials, things we
are not told about such as transportation distances,
fabric dyes and whether they are natural and
other added materials which would affect
biodegradability must be looked at before
calling it sustainable.

Monday 5 December 2011

Small Scale Sculptures

A series of 9 small scale sculptures made from recycled materials.









Morphing Maquettes

Maquettes created based on a drawing exercise which involved morphing 2 different objects together through a series of 8 drawings.


make a gif at gickr.com


                                                        The first model was created 
from the fifth drawing 
of a series showing a wooden 
mannequin morphing into 
a digital camera.



how to make a gif






The second is the third drawing of a series showing a peg morphing 
into a pair of scissors.